KRC-Forum

home post reply threaded view rules help

Forum List

Gas

Giant Scale

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

Scratch Build - Ziroli Corsair 2008 and beyond - 2008/01/05 02:27 OK,

I have been silent for awhile but I have not idle(totally). I have completed the fiberglassing process on 99% of the aircraft.

I have mounted the engine. Rough fit the cowl, installed cowl mounts and I'm almost done mounting up all the servo control horns, arms and linkages.

I'm looking for a pilot and playing with the canopy fit up. Soon I will be glueing abnd pinning in the control surface hinges.

It's January 7, 2008, the project started in December of 2005(I think). I've watched the Dave Platt Klass Kote Paint video about ten times. I'm almost ready to buy paint.

Primer could happen this spring and a test flight this summer.

It's a goal.

I will post some progress photos below. More to come.

Kevin

| | The administrator has disabled public write access.

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

Re:ZC 2008 - - 2008/01/05 02:42 Giant Corsair fuselage hanging next to my 60 size Top flite Corsair, Zenoah G-62 mounted

| | The administrator has disabled public write access.

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

Re:ZC 2008 - The Saga Continues - 2008/01/05 02:45 Flaps, Ailerons mounted, servos installed, control leads sized, soldered and final adjusted.

You can see the inner flap section on the right side, next to the cloth pin is NOT fiberglassed yet. The leading edge of the flap is not done, I had a problem with my servo arm alignment and I put that one section off to the side to finish after I get the servo arm situation figured out.

Post edited by: KevinKRC, at: 2008/01/09 05:13

| | The administrator has disabled public write access.

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

Re:ZC 2008 - The Saga Continues - 2008/01/05 02:47 Close up of the Elevator linkage in the tail.

I chose to install this servo as close as possible to the control surface to reduce play or flex in the mechanism.

| | The administrator has disabled public write access.

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

Re:ZC 2008 - The Saga Continues - 2008/01/05 02:50 After all the planning and fitting and replanning and refitting, the flaps still bind at about 50% deployment. Not to worry, some sanding at some key areas should free up the travel to design limit.

| | The administrator has disabled public write access.

KevinKRC

User

Platinum Boarder

Posts: 88

Karma: 1

| | The administrator has disabled public write access.

Forum List Gas Giant Scale

Joomlaboard Forum Component 1.1.6-svn
Two Shoes M-Factory

Shout Box

Latest Message: 4 months, 4 weeks ago

drhjr : disregard Rob's gone
drhjr : why aren't you working?
mcross : The indoor fly was cancelled due to lack of paying pilots
mcross : Seems they are having a free fly on 23-Feb
mcross : This link seems to be even more current «link»
KevinKRC : Check the Website, and email the coordinator, some of the dates have changed.
mcross : The VFSS are looking for pilots interested in an indoor fly in Downingtown «link»
guest_8776 : what up
guest_8776 : 43443
mcross : Hi rob2359, it's www.rcgroups.com Private Message me (mcross) and I'll show you around