RobSchaffer
User
Expert Boarder
| Posts: 21 |   |
Karma: 0
|
Re:Micro Heli Becomes Kiowa Warrior - 2007/02/19 18:59
IN the previous photo, you can see the location of the seam to remove the front of the fuselage. This location can vary, but I prefer to be able to access 90% of the mechanics for maintenence by only removing the nose. Once the body is finally assembled, you can't really notice this joint if done cleanly.
Now, after washing the fuselage, you are ready to paint. Krylon Fusion paints work well for plastics, but also any train paint or testors spray will work too. The photo shows Krylon Fusion Ultra Flat camo.
|
